DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming C-14 OFF STOP RUN Special Latch- Function Attrib.
Default M ed ON RUN STOP M1065 Syntax error OFF OFF - R NO OFF M1066 Loop error OFF OFF - R NO OFF M1067* Program execution error OFF OFF - R NO OFF M1068* Execution error locked (D1068) OFF - - R NO OFF M1072 PLC status (RUN/STOP), ON = RUN OFF ON OFF R/W NO OFF M1075 Error occurring when write in Flash ROM OFF - - R NO OFF M1080 COM2 monitor request OFF - - R/W NO OFF M1081 Changing conversion mode for FLT instruction OFF - - R/W NO OFF M1085 Selecting DVP-PCC01 duplicating function OFF - - R/W NO OFF M1086 Enabling password function for DVP-PCC01 OFF - - R/W NO OFF M1088 Matrix comparison. Comparing between equivalent values (M1088 = ON) or different values (M1088 = OFF).
OFF OFF - R/W NO OFF M1089 Indicating the end of matrix comparison. When the comparison reaches the last bit, M1089 = ON. OFF OFF - R NO OFF M1090 Indicating start of matrix comparison. When the comparison starts from the first bit, M1090 = ON. OFF OFF - R NO OFF M1091 Indicating matrix searching results. When the comparison has matched results, comparison will stop immediately and M1091 = ON. OFF OFF - R NO OFF M1092 Indicating pointer error. When the pointer Pr exceeds the comparison range, M1092 = ON OFF OFF - R NO OFF M1093 Matrix pointer increasing flag. Adding 1 to the current value of the Pr. OFF OFF - R/W NO OFF M1094 Matrix pointer clear flag.
Clear the current value of the Pr to 0 OFF OFF - R/W NO OFF M1095 Carry flag for matrix rotation/shift/output. OFF OFF - R NO OFF M1096 Borrow flag for matrix rotation/shift/input OFF OFF - R/W NO OFF M1097 Direction flag for matrix rotation/displacement OFF OFF - R/W NO OFF M1098 Counting the number of bits which are “1” or “0” OFF OFF - R/W NO OFF M1099 ON when the bits counting result is “0” OFF OFF - R/W NO OFF M1120* Retaining the communication setting of COM2 (RS-485), modifying D1120 will be invalid when M1120 is set.
OFF OFF - R/W NO OFF M1121 For COM2(RS-485), data transmission ready OFF ON - R NO OFF M1122 For COM2(RS-485), sending request OFF OFF - R/W NO OFF M1123 For COM2(RS-485), data receiving completed OFF OFF - R/W NO OFF M1124 For COM2(RS-485), data receiving ready OFF OFF - R/W NO OFF