Chapter 9 Ethernet Specification and Operation 9.3.2 EtherNet/IP Specification Maximum number of connections when using DVP-ES3 Series to connect to other devices through Ethernet/IP: DVP-ES3 Series can act as a Scanner and an Adapter simultaneously. It can connected up to 16 devices. Each device can establish up to 8 connections for data mapping. Data mapping types can be I/O connection and Consumed TAG. You can use explicit message for data mapping at the same time, up to 8 explicit message 9_ connections can be created.
9-11 Item DVP-ES3 Series General Device type Scanner / Adapter Topology type Linear, Star topology CIP Network I/O Connection CIP connection number 16 8 TCP connection number 8 (for all connection types) Requested Packet Interval (RPI) 5 ms – 1000 ms Max. Transmission Speed 3000 pps Max. Data Length/per 500 bytes transmission CIP Network Explicit Message Class 3 8 8 (Connected Type) UCMM Total 8 (for all connection types) (Non-Connected Type, only uses TCP connections) CIP Objects Identity, Message Router, Assembly, Connection Manager, Port, TCP/IP interface, Ethernet link, Vendor specific CIP Network TAG Max. Consumed TAG Number 16 Max. Produced TAG Number 16 Max.
Data Length 500 bytes (IO Connection) 400 bytes (Explicit Message) Requested Packet Interval (RPI) 5 ms – 1000 ms