DVP-ES3 Series Operation Manual 2.2 CPU Module Specifications 2.2.1 Functional specifications _2 2-3 Item DVP32ES311T, DVPxxES300T, DVPxxES300R Remark Execution The program is executed cyclically. The inputs and outputs can be Regenerated inputs/outputs Input/Output control controlled through the Direct inputs/outputs direct inputs (DX) and direct outputs (DY).
IEC 61131-3 Programming language Ladder diagrams, continuous function charts, structured text, and sequential function charts Instruction execution speed 40K steps/ms Number of instructions Over 600 instructions 1-32000 Constant scan cycle (ms) (The scan cycle can be increased by one Setting the parameter millisecond.) Program capacity (step) 64K steps (128K bytes) Installation DIN rails or screws Installation of a module No backplane installation; only module after module Maximum number of Up to 8 modules for AIO modules and cannot modules which can be exceed 256 IO points installed Refer to ISPSoft 283 tasks (32 cyclic tasks; 16 I/O interrupts; four Number of tasks Manual for more timed interrupts, etc.) information.
Number of inputs/outputs Number of inputs/outputs 256 accessible to an actual input/output module Input relays [X] 256 (X0 ~ X377) Octal format Output relays [Y] 256 (Y0 ~ Y377) Octal format Internal relays [M] 8192 (M0–M8191) Timers [T] 512 (T0–T511) Counters [C] 512 (C0–C511) 32-bit counter [HC] 256 (HC0–HC255) Data register [D] 30000 (D0–D29999) Data register [W] 30000 (W0–W29999) Stepping relay [S] 2048 (S0–S2047) Index register [E] 10 (E0–E9) Special auxiliary relay [SM] 4096 (SM0–SM4095) Special data register [SR] 2048 (SR0–SR2047) Serial communication port 2x RS-485 Ethernet port 10/100 M Refer to the section