Chapter 2 Specifications and System Configuratio n 2.3 Digital Input/Output Module Specifications 2.3.1 General Specifications 2_ Electrical specifications for the inputs on digital input/output modules (The signals passing through the inputs are 24 VDC signals.) Electrical specifications for the outputs on a digital input/output module 2-10 Model (DVP) 08XM 08XN 08XN 08XP 08XP 16XM 16XP 16XN 16XP 16XN Item 211N 211R 211T 211R 211T 211N 211T 211T 211R 211R Power supply Provided by CPU module 24VDC Weight 105 g 135 g 109 g 120 g 107 g 148 g 149 g 143 g 179 g 209 g Model (DVP ) 24XN 24XN 24XP 24XP 32XP 32XP Item 200R 200T 200R 200T 200R 200T Power supply 100VAC ~ 240VAC Weight 390 310 300 260 340 280 Model (DVP) 08XM 08XP 08XP 16XM 16XP 16XP 24XP 24XP 32XP 32XP Item 211N 211R 211T 211N 211R 211T 200R 200T 200R 200T Number of inputs 8 4 4 16 8 8 16 16 16 16 Connector type Removable terminal block Input type Digital input Input form Direct current (sinking or sourcing) Input voltage 24VDC, 5mA Action OFF→ON >15VDC level ON→OFF Response OFF→ON 10ms±10% time ON→OFF 15ms±10% Input impedance 4.7kΩ Voltage input Sinking:
The inputs are NPN transistors whose collectors are open collectors. Sourcing: The inputs are PNP transistors whose collectors are open collectors. Input signal Electrical isolation Optocoupler Input display When the optocoupler is driven, the input LED indicator is ON. Model (DVP) 08XP 08XN 16XP 16XN 24XP 24XN 32XP 08XP 08XN 16XP 16XN 24XP 24XN 32XP Item 211R 211R 211R 211R 200R 200R 200R 211T 211T 211T 211T 200T 200T 200T Number of outputs 4 8 8 16 8 24 16 4 8 8 16 8 24 16 Connector type Removable terminal block Output type Relay-R Transistor-T (sinking) Voltage below 250 VAC, 30VDC 5 ~ 30VDC Leakage current 0uA Resis- 2A/output, 5A/COM*3 0.5A/output, 4A/COM*2 tance Max.
load Induc- Life cycle curve*4 12W (24VDC) tance Bulb 20WDC/100WAC 2W（24VDC）