Delta DVP-ES3 — 6.26.2 Explanation of High-speed Output Instructions

DVP-ES3 Series Programming Manual _6 Symbol S 1 : Signal input device S 2 : Number of input pulses S 3 : Pulse input frequency S 4 : Denominator (output frequency) for the proportion of the input frequency and output frequency S 5 : Numerator (input frequency) for the proportion of the input frequency and output frequency D 1 : Pulse output device D 2 : Pulse output frequency Explanation 1. This instruction specifies the catch speed and proportional output. S 1 can only specify X0, X2, X4, X6, X10 and X12 as the input points, and the operand occupies two consecutive input points. You cannot execute the instruction if the input points are the points specified for S 1 above.

After you select the input points, the high-speed counter is automatically specified. If there is a DCNT instruction (API 1004) with the same high-speed counter in the program, 6-806 API Instruction Operand Description 2708 CSFO S1,S2,S3,S4,S5,D1,D2 Catch speed and proportional output Device X Y M S T C HC D FR SM SR E K 16# “$” F S1  S2  S3  S4  S5  D1  D2  BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S1  S2   S3   S4  S5  D1  D2   Pulse Instruction 16-bit instruction 32-bit instruction - ES3 -