DVP-ES3 Series Programming Manual When the PLC runs the program and M0 is ON, the PLC starts drawing the first segment of the 2-axis synchronized motion at 50 kHz. D1 increments by one when a segment of the 2-axis synchronized motion completes and the second segment of 2-axis synchronized motion starts to automatically execute. The operation pattern repeats until _6 the third segment of 2-axis synchronized motion completes. When D1=1, the PLC starts to draw the line from P7 to P8 with the DPPMA instruction. When D1=2, the PLC starts to draw the line from P8 to P9 with the DPPMA instruction. When D1=3, the PLC starts to draw the line from P9 to P7 with the DPPMA instruction. 6-834