Delta DVP-ES3 — 6.26.2 Explanation of High-speed Output Instructions

DVP-ES3 Series Programming Manual 8. When the X axis coordinate = 0 and the Y axis coordinate >= 0 for target point B, then point B is defined as the point staying in QI of point A. Whereas, if Y axis coordinate staying in QIII of point A. Example 1. Draw a DELTA LOGO as the figure below. _6 2. Steps: divide the logo into three parts.  For an ellipse: use the DCICR instruction (API 2712) for the relative-position counterclockwise arc interpolation.  The absolute coordinates of the ellipse: P1(39930 , -9982), P4 (123119 , 73206), P3 (73206 , 123119) and P2 (-9982 , 39930)  Taking (39930 , -9982) as the start point, the obtained relative coordinates:

(83189, 83188), (-49913, 49913), (-83188 , -83189) and (49912 , -49912). 6-840