DVP-ES3 Series Programming Manual Example 2 (Structured Texts programming language): _6 1. When M1 changes from OFF to ON, this instruction starts to enable the servo at station address 2. When SM1652 is ON, it indicates Servo-ON. 2. Make sure M1 and SM1652 are both ON and then set the auto return communication control right flag SM1582 to ON other communication instructions. for station address 2. This will free the communication control right and the station address 2 can receive and execute 3. When M2 changes from OFF to ON, this instruction starts to disable the servo at station address 2. When SM1652 is OFF, it indicates Servo-OFF. 4.
Make sure M2 is ON and SM1652 is OFF and then set the auto return communication control right flag SM1582 to ON for station address 2. This will free the communication control right and the station address 2 can receive and execute other communication instructions. 6-882