DVP-ES3 Series Programming Manual Symbol S 1 : Station address of the servo S 2 : Acceleration time (ms) _6 S 3 : Deceleration time (ms) Explanation 1. This instruction sets the servo acceleration and deceleration time for the servo at the address in S 1 . The INITC instruction must be complete before this instruction is executed. 2. The range of S 1 is 1–8 (for servo) and 21-28 (for inverter). There will be no execution when the input value is out of the range. 3.
Table to describe S 2 and S 3 6-884 API Instruction Operand Description 2802 CASD S1 , S2 , S3 Setting the acceleration time and deceleration time for a servo Device X Y M S T C HC D FR SM SR E K 16# “$” F S1 S2 S3 BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S1 S2 S3 Pulse instruction 16-bit instruction 32-bit instruction - ES3 - Drive type Range of S1 Range of S2 and S 3 Descriptions of S2 and S3 Servo 1-8 1-32767 (ms) S2: Acceleration time is the period of time during which the servo spins up from 0 to 3000.0 rpm. S3:
Deceleration time is the period of time during which the servo spins down from 3000.0 rpm to 0. Inverter 21-28 100-32700 (ms) The input value S2: Acceleration time is the period of time during which the