Delta DVP-ES3 — 6.27.2 Explanation of CANopen Communication Instructions

Chapter 6 Applied Instructions Symbol S 1 : Station address of servo S 2 : Relative target position S 3 : Target speed 6_ Explanation 1. This instruction executes the servo relative position control for the servo at the address specified in S 1 . The INITC and ASDON (servo ON) instructions must be complete before this instruction is executed. 2. The range of S 1 is 1–8. There will be no execution when the input value is out of the range. 3. The range of S 2 is -2147483648 to +2147483647. The +/- sign indicates the forward / reverse direction. The target position is a relative position. 4. The unit of the value of S 3 is 0.1 rpm. The range is 1–60000, which indicates 0.1–6000.0 rpm. 5.

When the target position is reached, the corresponding completion flags of axes SM1631–SM1638 are ON. After the axis starts to output, PLC clears the corresponding completion flag. 6. Refer to the following table for the corresponding SM and SR of the axes. 7. SM1682 is ON when an error occurs during communication.

In addition, SR658 retains the number of the axis in 6-887 API Instruction Operand Description 2803 D DRVIC S1, S2, S3 Servo relative position control Device X Y M S T C HC D FR SM SR E K 16# “$” F S1    S2     S3     BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S1   S2   S3   Pulse instruction 16-bit instruction 32-bit instruction - - ES3