Delta DVP-ES3 — 6.27.2 Explanation of CANopen Communication Instructions

Chapter 6 Applied Instructions The following table shows the Delta special drier CANopen error codes. (error code in SR659) 6_ 6-891 Error Code Cause 0x0002 The slave does not respond to the SDO message. 0x0003 An error occurs in the message received by the slave. This error often occurs when the settings of the COPRW instruction are invalid causing the slave not to receive the complete message. 0x0004 The slave PDO message is not received. 0x0005 An error occurs while using the instruction operand. 0x0006 One of the stations is being used when the INITC instruction is executed.

0x0007 Slave station address exceeds acceptable range of the instruction INITC 0x0008 A slave cannot be reset; check if the communication cable is connected and if the communication of the slave is working properly.