Delta DVP-ES3 — 6.27.2 Explanation of CANopen Communication Instructions

Chapter 6 Applied Instructions messages. 5. The EMER instruction can read 5 Emergency messages at most. Every time the reading is successful, the Ok flag turns on and Len displays the total number of messages which are read. You can judge how many consecutive words are occupied by Dest based on the length. Every message uses 4 words. The data are stored in the order from lower 8 bits to higher 8 bits. The storage format is shown as below. (E.g. Dest is D10, Len is 2 which is the number of messages stored in D5.) 6_ 6-915 D device no. Value D5 2 D device no.

Higher 8 bits Lower 8 bits D10 The second byte in the first message The first byte in the first message D11 The forth byte in the first message The third byte in the first message D12 The sixth byte in the first message The fifth byte in the first message D13 The eighth byte in the first message The seventh byte in the first message D14 The second byte in the second message The first byte in the second message D15 The forth byte in the second message The third byte in the second message D16 The sixth byte in the second message The fifth byte in the second message D17 The eighth byte in the second message The seventh byte in the second message