DVP-ES3 Series Programming Manual _7 7-18 ERROR LED indicator status Error CPU Description code status Blinking Blinking Blinking ON OFF fast normally slowly 7037 The device checksum for the communication serial port of Ethernet is incorrect. Continue V 7041 The device communication function code in USB is incorrect. Continue V 7042 The device communication address used in USB is incorrect. Continue V 7043 The device used in USB exceeds the device range. Continue V 7044 The device length of the communication data in USB exceeds the limit. Continue V 7047 The device checksum for the communication serial port of USB is incorrect.
Continue V 7203 Invalid communication function code Continue V 8105 The contents of the downloaded program are incorrect. The program syntax is incorrect. Continue V 8106 The contents of the downloaded program are incorrect. The length of the execution code exceeds the limit. Continue V 8107 The contents of the downloaded program are incorrect. The length of the source code exceeds the limit. Continue V 8000 - 8FFF Errors occur between software and PLC. Continue V