Chapter 4 Instruction Structure *1: Pulse instructions cannot be used in function blocks. If you want to get the function of the pulse instruction in a function block, refer to the following example. 4_ Example: 1. First, declare 10 bit variables tempBit[10] to be used in the system. 2. When StartBit1 switches from OFF to ON, method 1 (network 1) and method 2 (network 2) can only execute the MOV instruction once; you can choose which one to use. 3. You cannot use the variable tempBit in the system more than once.
4-7 Instruction which cannot be used in the function block Substitute instruction in the function block LDP/ANDP/ORP PED/APED/OPED LDF/ANDF/ORF NED/ANED/ONED PLS - PLF - NP FB NP _ PN FB PN _ MC - MCR - All pulse instructions in applied commands *1