DVP-ES3 Series Programming Manual _2 2-28 Latched Attribute Default OFF STOP RUN SM Function ON RUN STOP *SM954 Error in data exchange connection 27 through COM2 OFF – – N R OFF *SM955 Error in data exchange connection 28 through COM2 OFF – – N R OFF *SM956 Error in data exchange connection 29 through COM2 OFF – – N R OFF *SM957 Error in data exchange connection 30 through COM2 OFF – – N R OFF *SM958 Error in data exchange connection 31 through COM2 OFF – – N R OFF *SM959 Error in data exchange connection 32 through COM2 OFF – – N R OFF SM1000 Ethernet setting flag; ON: the data in SR1000–SR1006 is written into the flash memory.
OFF – – N R/W OFF SM1001 State of the Ethernet connectivity OFF – – N R OFF *SM1090 TCP connection busy. OFF – – N R OFF *SM1091 UDP connection busy. OFF – – N R OFF SM1100 Ethernet not connected OFF – – N R OFF *SM1106 Basic Ethernet management: connection error OFF – – N R OFF *SM1107 Basic Ethernet management: Basic setting error OFF – – N R OFF *SM1109 Basic TCP/UDP socket management: the local port is already used. OFF – – N R OFF SM1111 EtherNet/IP data exchange flag OFF – – N R OFF *SM1113 Email service error OFF – – N R OFF *SM1116 Trigger 1 switch for the email. OFF – – N R OFF *SM1117 Trigger 1 for the email OFF – – N R OFF *SM1119 ON:
Trigger 1 is triggered and the email has been sent successfully. OFF – – N R OFF *SM1120 ON: Trigger 1 is triggered but the email cannot be sent due to email content error. OFF – – N R OFF *SM1122 ON: Trigger 1 is triggered and there is an SMTP server response timeout. OFF – – N R OFF *SM1123 ON: Trigger 1 is triggered and there is an SMTP server response error. OFF – – N R OFF *SM1124 ON: Trigger 1 is triggered and the size of the attachment exceeds the limit. OFF – – N R OFF *SM1125 Trigger 1 is triggered and the attachment is not found. OFF – – N R OFF *SM1126 Trigger 2 switch for the email. OFF – – N R OFF *SM1127 Trigger 2 for the email OFF – – N R OFF *SM1129 ON:
Trigger 2 is triggered and the email has been sent successfully. OFF – – N R OFF *SM1130 ON: Trigger 2 is triggered but the email cannot be sent due to email content error. OFF – – N R OFF *SM1132 ON: Trigger 2 is triggered and there is an SMTP server response timeout. OFF – – N R OFF *SM1133 ON: Trigger 2 is triggered and there is an SMTP server response error. OFF – – N R OFF *SM1134 ON: Trigger 2 is triggered and the size of the attachment exceeds the limit. OFF – – N R OFF