DVP-ES3 Series Programming Manual The data in D29-D22 is shifted to the right. The value in D20 decreases by one. n=10 D0 Pointer The data is read. Additional remarks 1. If the value in S is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If S + n -1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. _6 3. If n not between 2–512, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 4. You can use the SFWR instruction with the SFRD instruction (API 1105) to write and read the data. 6-320 D29 D28 D27 D26 D25 D24 D23 D22 D21 D20