DVP-ES3 Series Programming Manual b0 b15 D0 D1 1 SM 615 D2 Ptr Ptr b0 b15 D0 D1 1 SM 615 D2 D20 Ptr Additional remarks _6 1. If S + n -1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If n is not between 1–256, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. Instruction flags: SM608: The matrix comparison comes to an end. When the last bits are compared, SM608 is ON. SM611: Matrix pointer error flag. When the value of the pointer exceeds the comparison range, SM611 is ON. SM612: Matrix pointer increasing flag. The current value of the pointer increases by one. SM613:
Matrix pointer clearing flag. The current value of the pointer is cleared to zero. SM615: Borrow flag for the matrix shift/output. 6-374 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 45 n is executed D20 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1 46 46