DVP-ES3 Series Programming Manual b31 b0 b15 b8 b7 b0 0876 5432 D + 0 D + 1 D + 2 D + 3 D + 4 5. If SM690 is OFF, the instruction stores the ending character 16#0000 in D +5. If SM690 is ON, the value in D +5 is unchanged without the ending character. 6. Even if the first digit of binary-coded decimal value in S is 0, the instruction converts it into an ASCII code 0 (16#30). Example 1 Suppose the binary-coded decimal value in D10 is 1295 and SM690 is OFF. When the instruction executes, the values are D0=16#3231, D1=16#3539, D2=16#0000. D10 b15 b8 b7 b0 _6 1295 D0 D1 D2 Example 2 Suppose the binary-coded decimal value in D10 is 00578352 and SM690 is OFF.
When the instruction executes, the values are D0=16#3030, D1=16#3735, D2=16#3338, D3=16#3235, D4=16#0000. D10 b15 b8 b7 b0 0057 8352 D0 D1 D2 D3 D4 6-634 16#38 16#30 16#36 16#37 16#34 16#35 16#32 16#33 16#00 16#00 16#32 16#31 16#35 16#39 16#00 16#00 16#30 16#30 16#37 16#35 16#33 16#38 16#32 16#35 16#00 16#00