Delta DVP-ES3 — 6.21.2 Explanation of String Processing Instructions

Chapter 6 Applied Instructions  Decimal format: Integer OR Integer Decimal . The decimal point “,” (16#2E), can only occur once and there must be numbers before and after the decimal point.  Exponential format: OR Integer . The decimal point “,” (16#2E), can only occur once and there must be numbers before and after the decimal point. There must be a number before the exponent. Integers: only numbers “0” (16#30)–“9” (16#39) are allowed. Decimals: only numbers “0” (16#30)–“9” (16#39) are allowed. Exponents: The format for a four digit ASCII code is as below. There must be an “E” (16#45) or ”e” (16#65) and it can only occur once.

6_ There must be a sign “+”(16#2B) or “-” (16#2D) and it can only occur once. There must be two digits; numbers “0” (16#30)–“9”(16#39). 3. If the string in S is out of range, the instruction is not executed, SM is ON, and the error code in SR0 is 16#2003.  If the first character in the string is a number ”0”–”9” (16#30–16#39), the valid range for a floating-point string is 1–24. The minimum length for the string is one.  If the first character in the string is a blank (16#20) or a sign (“+”(16#2B) or “-” (16#2D)), the valid range for a floating-point string is 2–24. The minimum length for the string is two (“+1”). 4.

If the conversion result exceeds the range of values that can be represented by floating-point numbers, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2013. 6-659 Integer Exponent Decimal Exponent E OR e +OR- First number Second number