DVP-ES3 Series Programming Manual 3. When the client and server are both ES3 Series PLC and the communication timeout settings are set the same, the server automatically cuts the connection if a timeout occurs on the server first. In this case, the error flag on the client is not ON. On the other hand, if a timeout occurs on the client first, the error flag on the client is ON and the connection is cut.
6-696 Error Code Error Flag Description (SR180) 16#6209 UDP Socket error flag Illegal IP address 16#620A UDP Socket error flag Illegal communication mode 16#620C UDP Socket error flag Illegal address for sending data 16#620D UDP Socket error flag Length of sent data exceeds the range 16#620E UDP Socket error flag Source data device exceeds the range 16#620F UDP Socket error flag Illegal address for receiving data 16#6210 UDP Socket error flag Length of data received exceeds the range 16#6211 UDP Socket error flag Target data device exceeds the range 16#6213 UDP Socket error flag Size of data received larger than dataset 16#6215 UDP Socket error flag UDP Socket not connected 16#6217 UDP Socket error flag UDP Socket connection triggered 16#6218 UDP Socket error flag Sending of data through UDP Socket triggered 16#621A UDP Socket error flag Disabling UDP Socket connection triggered 6 _