DVP-ES3 Series Programming Manual 6. If data is sent through a UDP socket, and no error occurs after the instruction is executed, the flag for sent data is ON. If an error occurs, the error flag is ON. 7. In general, the SSENDP pulse instruction is used. Example Refer to the example in the SOPEN instructions (API 2200). Additional remarks 1. The following table explains TCP connection errors.
6-698 UDP Socket Number Data Sending Error Flag 1 SM1336 SM1338 2 SM1341 SM1343 3 SM1346 SM1348 4 SM1351 SM1353 Error Code Error Flag Description 16#2003 SM0 S1 or S2 exceeds the range 16#600D SM1100 Ethernet network not connected 16#6202 TCP Socket error flag Illegal TCP Socket mode setting 16#6203 TCP Socket error flag Illegal address for sending data 16#6204 TCP Socket error flag Length of sent data exceeds the range 16#6205 TCP Socket error flag Source data device exceeds the range 16#6212 TCP Socket error flag TCP Socket connection timeout 16#6214 TCP Socket error flag TCP Socket connection rejected by remote equipment 16#6215 TCP Socket error flag TCP Socket not connected 16#6218 TCP Socket error flag Sending of data triggered 6 _