Delta DVP-ES3 — 6.22.2 Explanation of Ethernet Instructions

DVP-ES3 Series Programming Manual 2. When you enable this instruction for the first time, it sends the communication command. If the number of connected slaves reaches the upper limit, the communication status value in D 1 is 0, and the communication command is not sent. 3. When the parameter exceeds the range, the instruction is not executed and the communication status value in D 1 is 4. Example 1 The instruction reads the vendor code of the device at 192.168.1.5 and stores the value in D100. It sets the EtherNet/IP Object parameters as shown below. (1) Class ID = 1 (2) Instance ID = 1 (3) Attribute ID = 1 6-710 6 _