DVP-ES3 Series Programming Manual S : The data source S 1 : The length of the data that the instruction writes into the file If the value in S 1 is 0, the instruction does not write any data into the file. S 2 : The line advance 6-730 Item Code Description The unit of the value is a double word. The file name extension is .txt. Use ASCII codes. The value that is stored is a hexadecimal format. 7 The values are separated by a comma. The unit of the value is a Word. The file name extension is.csv. Use ASCII codes. The value that is stored is a decimal format. Function option 0 Appending The data that is written into the memory card is appended after the last value in the file.
This is the default value If the file does not exist, it is created automatically. 1 Overwriting The data that is written into the memory card replaces the values in the file starting from the value indicated by the value in S4. If the file does not exist, it is created automatically. Reserved - The values of bit 8–bit 15 are 0. 6 Item Description Value unit If the file format is 0, 1, 3, 5, or 7, the unit of the value is a word. If the file format is 2, 4, or 6, the unit of the value is a double word.
Parameter unit Double word Length of the data The devices where the instruction stores the data cannot exceed the device range, and the size of the data that the instruction writes into the file cannot be more than four gigabytes. Refer to Chapter 2 for more information about devices.