Delta DVP-ES3 — 6.23.2 Explanation of Memory Card / File Register Instructions

DVP-ES3 Series Programming Manual reading, and checks if the file name is legal. The characters in the file name can be A–Z, a–z, and 0–9. The file name extension depends on the file format. The file that the instruction creates is in the default folder. If the file name is “Test1”, the instruction writes the characters into the devices as follows.  The default folder path: 2. Instruction flags: _6 3. Related error codes (SR453): 6-746 Model name Folder path ES3 Series PLC CARD\ES3\UserProg Flag Description SM450 ON: the memory card is in the CPU module. SM451 State of the write protection switch on the memory card ON: the memory card is write protected. OFF:

the memory card is not write protected. SM452 The data is being written from the PLC to the memory card, or the data is being read from the memory card to the PLC. SM453 ON: an error occurs during the operation of the memory card. If the flag is ON, you must reset it to OFF. The error code is stored in SR453. Error code Description 16#005E An error occurs when the memory card is initialized. 16#005F The path is incorrect, or the file does not exist. 16#0060 The default folder cannot be created. 16#0061 The memory space is insufficient. 16#0062 The memory card is write protected. 16#0063 An error occurs when the data is written into the file.