Delta DVP-ES3 — 6.24.2 Explanation of Task Control Instructions

Chapter 6 Applied Instructions 6.24.2 Explanation of Task Control Instructions Symbol S : Task number Explanation 1. This instruction enables the cyclic task specified by S . 2. When the PLC runs, the execution of the cyclic tasks depends on the setting of the cyclic tasks in ISPSoft. 6_ 3. The operand S must be between 0-31. 4. Refer to the ISPSoft User Manual for more information about creating and enabling tasks. Example When the PLC runs, cyclic task (0) is enabled. When the TKON instruction in cyclic task (0) executes, it enables cyclic task (1), and M10 is ON. You create cyclic tasks in ISPSoft, and you define their default enabled/disabled state in ISPSoft.

Cyclic task (0) is enabled when the PLC runs, and cyclic task (1) is not enabled when the PLC runs. 6-749 API Instruction code Operand Function 2400 TKON P S Enabling a cyclic task Device X Y M S T C HC D FR SM SR E K 16# “$” F S      BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S    Pulse instruction 16-bit instruction 32-bit instruction ES3 ES3 -