Delta DVP-ES3 — 6.25.2 Explanation of Task Control Instructions

DVP-ES3 Series Programming Manual Symbol S 1 : Name of the SFC POU S 2 : Function code Explanation _6 1. This instruction pauses the SFC POU specified by S 1 according to the function code in S 2 . 2. The instruction can pause the SFC POU specified by S 1 only when the PLC is scanning the SFC POU. 3. When paused, the SFC status and parameters (such as SFC/STEP/ACTION/TRANSITION) are stored. 4. The operands are described as follows.  S 1 defines the name of the SFC POU.  When S 2 =0, the instruction preserves all the executing actions of the SFC and the outputs, and the system does not run the final scan.

 When S 2 =1, the instruction clears all the executing actions and the outputs of the SFC POU, and the system runs the final scan.. 5. The range of S 2 is 0–1. When it is out of range, it is processed as 0. 6. When the state of the SFC POU is PAUSE/STOP, executing this instruction is invalid. 6-758 API Instruction code Operand Function 2501 SFCPSE S1,S2 SFC Pause Device X Y M S T C HC D FR SM SR E K 16# “$” F S1 S2    BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S1 S2    Pulse instruction 16-bit instruction 32-bit instruction - ES3 -