2 Functions of Devices in DVP-PLC c) Draw arcs in the four quadrants Destination: Draw four 90° arcs (see Figure 4) Program explanation: When the direction signal is On, the direction will be a positive one; when the direction signal is Off, the direction will be a negative one (see Figure 5) Output frequency and number of pulses:
see Table 2 Y Y0=OFF Y1=ON Y0=ON Y1=ON X Y0=ON Y1=OFF Y1=OFF Y0=OFF (-50000,-50000) (50000,-50000) (Figure 4) M1002 M1 M2 M3 M4 M0 M1133 M1135 (Figure 5) DVP-PLC Application Manual 2-98 0,50000) FF N uadrant II (50000 Y Y Quadrant (0,0) adrant III FF FF Quadrant Y 02 MOV K200 D1133 MOV K10 D1134 MOV K300 D1135 MOV K10 D1136 MOV K200 D1133 MOV K10 D1136 MOV K10 D1134 MOV K300 D1135 SET Y0 SET Y1 SET Y0 SET Y1 RST Y0 SET Y1 RST Y0 SET Y1 RST Y0 RST Y1 RST Y0 RST Y1 SET Y0 RST Y1 SET Y0 RST Y1