2 Functions of Devices in DVP-PLC situation that the third layer can have only 15 PLCs. Therefore, D1399 allows more PLCs connected in a multi-layer network. 11. Operation Procedure of PLC LINK Set up the Slave ID# to be read Set up the number of data in Slave to be read Set up the Slave ID# to be written Set up the number of data in Slave to be written ( If there is no set value, use the previous set value or the default value.) Disable Enable Enable 32 slaves linkage and up to 100 data for exchange 1. Enable 32 slaves linkage and up to 100 data for exchange (set M1353). 2. Set up the register D for storing the read data. 3. Set up the register D for storing the written data.
Disable 32 slaves linkage and up to 100 data for exchange. (Reset M1353) Disable Enable Communicating by Modbus 0X17 Set M1354 Reset M1354 Enable manual mode Enable auto mode Enable auto/maual mode of EASY PLC LINK Set M1351 Set M1352 Set times of communication (D1431) Set M1350 Start to execute EASY PLC LINK 2-134 DVP-PLC Application Manual