2 Functions of Devices in DVP-PLC SA/SX/SC series MPU: Note 1: Besides 4DI and 2DO, SX series MPU has also 2AI (12-bit) and 2AO (12-bit) of analog input/output. Note 2: SX/SA/SC series MPU share the extension units with SS series MPU. The input points on I/O extension units start from X20 and output points start from Y20. The calculation on the No. of I/O points is the same as that in SS series. EH series MPU: Note 1: The output type of 20EH00T and 32EH00T is transistor, among which Y0 and Y2 are high-speed transistor output (200kHz) and other outputs are normal transistor output (10kHz).
The output type of other MPUs with 16/48/64/80 points is transistor and all outputs are normal transistor output (10kHz). Note 2: The terminal layouts of 32EH00T, 32EH00R and 32EH00M are different. See the instruction sheets of EH series MPU. In 32EH00M, CH0 (Y0, Y1) and CH1 (Y2, Y3) are high-speed differential output (200kHz). Note 3: The start No. of the input and output points on the I/O extension unit resumes from the last No. in the MPU. The start No. of input points on the I/O extension unit of DVP-16EH and DVP-20EH start from X20 and output points start from Y20. The numbers on the I/O extension unit are in sequence, with max. input point No. X377 and max. output point No. Y377.
EH2 series MPU: Note 1: The output type of 20EH00T2 and 32EH00T2 is transistor, among which Y0 and Y2 are high-speed transistor output (200kHz) and other outputs are normal transistor output (10kHz). The output type of other MPUs with 16/48/64/80 points is transistor and all outputs are normal transistor output (10kHz). Note 2: The output type of 40EH00T2 is transistor, among which CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4) and CH3 (Y6) are high-speed transistor output (200kHz). The output type of other output points is normal transistor output (10kHz). The high-speed inputs CH0 (X0, X1), CH1 (X4, X5), CH2 (X10, X11) and CH3 (X14, X15) are able to achieve max. frequency 200kHz. Note 3:
The I/O points on I/O extension units follow the I/O points on MPUs. The input points on DVP-16EH2 and DVP-20EH2 start from X20 and output points from Y20. The I/O points on I/O extension units are numbered in sequence. The maximal input number is X377, and the maximal output number is Y377. SV/SV2 series MPU: Note 1: The output type of 28SV11T is transistor output, among which CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4) and CH3 (Y6) are high-speed transistor output (200kHz); others are normal transistor output (10kHz). Note 2: The input points on I/O extension units start from X20 and output points start from Y20. The calculation on the No. of I/O points is the same as that in SS series.
DVP-PLC Application Manual 2-11 Model DVP-10SX (Note1) DVP-12SA DVP-12SC I/O Extension Unit (Note 2) Input X X0 ~ X3 (4 points) X0 ~ X7 (8 points) X0 ~ X5, X10 ~ X11 (8 points) X20 ~ X177 Output Y Y0 ~ Y1 (2 points) Y0 ~ Y3 (4 points) Y0 ~ Y1, Y10 ~ Y11 (4 points) Y20 ~ Y177 DVP-20EH (Note 1) DVP-40EH I/O DVP-32EH Model DVP-16EH DVP-48EH DVP-64EH DVP-80EH Extension (Note1, 2) Unit (Note 3) Input X X0 ~ X7 (8 points) X0 ~ X13 (12 points) X0 ~ X17 (16 points) X0 ~ X27 (24 points) X0 ~ X27 (24 points) X0 ~ X37 (32 points) X0 ~ X47 (40 points) X※~X377 Output Y Y0 ~ Y7 (8 points) Y0 ~ Y7 (8 points) Y0 ~ Y17 (16 points) Y0 ~ Y17 (16 points) Y0 ~ Y27 (24 points) Y0 ~ Y37 (32 points) Y0 ~ Y47 (40 points) Y※~Y377 DVP-16EH2 DVP-20EH2 DVP-32EH2 DVP-40EH2 I/O Extension Model DVP-48EH2 DVP-64EH2 DVP-80EH2 (Note 1) (Note1) (Note 2) Unit (Note 3) Input X X0 ~ X7 (8 points) X0 ~ X13 (12 points) X0 ~ X17 (16 points) X0 ~ X27 (24 points) X0 ~ X27 (24 points) X0 ~ X37 (32 points) X0 ~ X47 (40 points) X※~X377 Output Y Y0 ~ Y7 (8 points) Y0 ~ Y7 (8 points) Y0 ~ Y17 (16 points) Y0 ~ Y17 (16 points) Y0 ~ Y27 (24 points) Y0 ~ Y37 (32 points) Y0 ~ Y47 (40 points) Y※~Y377 Model DVP-28SV (Note 1) I/O Extension Unit (Note 2) Input X X0 ~ X17 (16 points) X20 ~ X377 Output Y Y0 ~ Y13 (12 points) Y20 ~ Y377