8 Application Instructions API 100-149 Program Example 2: When M1018 = On, the program is in angle mode. When X0 = On, use the angle of (D1, D0) to obtain COS value and store the binary floating point result in (D11, D10). (0° ≤ angle M1002 X0 angle value D11 D 10 COS value (binary floating point) Remarks: For floating point operations, see “5.3 Handling of Numeric Values”. DVP-PLC Application Manual 8-50 SET M1018 DCOS D0 D10 D 1 D 0