8 Application Instructions API 100-149 If X0 is turned from Off to On, the external interruption will be generated. Owing to the fact that M1148 is ON, DELAY in the interrupt subroutine will be execute for 100 ms before the next step (X1 = On and Y0 = On) is executed. EI Main program FEND M1000 I001 X1 Y0 IRE T END Remarks: 1. User can define the delay time based on their needs. 2. The delay time may increase due do the influences from communication, high-speed counters and high-speed pulse output instructions. 3. The delay time of designated external output (transistor or relay) will increase due to the delay on the transistor or relay itself. See 2.3 for more information.
DVP-PLC Application Manual 8-60 SET M1148 DELAY K20 REF Y0 K8