9 Application Instructions API 150-199 2. Format of the table: 3. Monitor the segment No. that is currently being executed in register D301. 4. The pulse output curve: Frequency (Hz) (D237,D236) .... (D239,D238) (D5,D4) .... (D1,D0) (D7,D6) (D3,D2) Time (S) t t t t 1 2 .... 60 Remarks: 1. Flag explanations: M1029: On when CH0 (Y0) pulse output is completed. M1030: On when CH1 (Y2) pulse output is completed. M1036: On when CH2 (Y4) pulse output is completed. M1037: On when CH3 (Y6) pulse output is completed. M1334: When On, CH0 (Y0) pulse output will be forbidden. M1520: When On, CH2 (Y4) pulse output will be forbidden. M1335: When On, CH1 (Y2) pulse output will be forbidden. M1521:
When On, CH3 (Y6) pulse output will be forbidden. M1336: CH0 (Y0) pulse output indication flag M1337: CH1 (Y2) pulse output indication flag M1522: CH2 (Y4) pulse output indication flag M1523: CH3 (Y6) pulse output indication flag DVP-PLC Application Manual 9-129 S = D300, number of segments 2 (D300 = K60) S = D0, frequency (S + 0) 1 1 S = D0, number of output pulses 1 (S + 2) 1 K1 (1st segment) D1, D0 D3, D2 K2 (2nd segment) D5, D4 D7, D6 : : : : : : K60 (60th segment) D237, D236 D239, D238 X0 DPTPO END 0 DPTPO D0 D300 Y0