CANopen Communication Module DVPCOPM-SL 3 Basic Operation 3.1 Connecting DVPCOPM-SL to DVP-SV CPU Open the fixing clip on top and bottom of DVP-SV. Meet the extension port of DVPCOPM-SL with DVP-SV, as . Press the fixing clips on top and bottom of DVP-SV and check is the connection is fine, as . 2 POWER DVPCOPM RUN DVP28SV ERR NODE ADDRESS x16 1 D R 1 D R 2 x16 0 1 I N 0 D R 0 S H LD C A N - C A N + STOP RUN G N D 2 3.2 Installing DVPCOPM-SL and DVP-SV CPU on DIN Rail Use 35mm DIN rail. Open the DIN rail clip on DVP-SV and DVPCOPM-SL. Insert DVP-SV and DVPCOPM-SL onto the DIN rail.
Clip up the DIN rail clips on DVP-SV and DVPCOPM-SL to fix DVP-SV and DVPCOPM-SL on the DIN rail, as shown below. 35mm DIN rail DVP-PLC Operation Manual 10 D VPCOPM POWER RUN ERR ADDRESS NODE DVP28SV x161 x160 DR 2 DR 1 DR 0 IN 0 CAN+ RUN SHLD CAN- STOP GND 35