Delta Electronics DVS — 3.1.6.1 DNS Configuration

Chapter 3 Featured Functions 3.1.6 DNS A Delta switch can function as a DNS client and forward the DNS queries to a DNS server. You can configure DNS servers manually or add them via a DHCP server. 3.1.6.1 DNS Configuration You can configure the global DNS settings and add a DNS server manually in this page. DNS Configuration DNS Server Configuration 3-21 Description Factory Default Trusted Client Messages Without Opt82 The amount of DHCP packets without option 82 that were received from a trusted client. 0 Description Factory Default DNS Status Specify whether the switch functions as a DNS client:  Disabled: The switch does not function as a DNS client and does not send DNS queries.

The settings do not take effect even if you configure a DNS server.  Enabled: The switch functions as a DNS client and can send DNS queries to a DNS server. Enable DNS Default Name Enter the DNS default domain name to be included in DNS queries. When the switch performs a lookup for an unqualified host name, the DNS default domain name is provided as the domain name. For example, if the DNS default domain name is delta.com and you enter “dvs” for a DNS query, then “dvs” is changed to “dvs.delta.com“ to resolve the name. The length of the name cannot be longer than 255 characters. None Description Factory Default Serial No The sequence number of the DNS server in the table.

If the IP address of the DNS server was dynamically added through DHCP, the number is followed by an asterisk (*). None