Delta Electronics DVS — 3.3.1.3 CST Port Configuration

DVS Series Managed Industrial Ethernet Switches User’s Manual CST Port Configuration 3-46 Description Factory Default Interface This field displays the interface number or port channel number. interface number Port Priority Enter the priority for the interface in the CIST. Enter a value between 0 and 240 that is a multiple of 16. The default priority is 128. 128 Admin Edge Port Specify whether the interface is an edge port in the CIST:  Enable: The interface is an edge port.  Disable: The interface is not an edge port. Disable Port Path Cost Leave the existing path cost, or enter a new path cost that is used for the interface in the CIST. Enter a number in the range of 1 to 200,000,000.

Enter a blank (that is, remove the number and make sure there is no space character in the field) to reset the path cost. 20000 Auto Calculated Port Path Cost This field shows whether you have globally enabled or disabled the dynamic path cost on the CST Configuration screen. Disable Hello Timer The hello time for the interface in the CIST. This time is the period in seconds that the interface waits between configuration messages. Enter 1 or 2 seconds. The default is 2 seconds. Notice: You can set the hello time only when the STP operation mode is MSTP. 2 BPDU Forwarding Specify whether the interface sets the mcheck flag to forward BPDUs:  Enable:

Depending on the STP operation mode, RST or MST BPDUs are forwarded.  Disable: BPDUs are not forwarded. Disable Auto Edge Specify whether the interface automatically becomes an edge port if it does not process BPDUs for a while:  Enable: The interface becomes an edge port.  Disable: The interface does not become an edge port. Enable Root Guard Specify whether the root guard mode can cause the interface to discard any superior information received by the interface to prevent the root of the device from changing. When this situation occurs, the interface enters the discarding state and no longer forwards any packets:  Enable: The interface can enter the discarding state.  Disable:

The interface cannot enter discarding state. Disable TCN Guard Specify whether the topology change notification (TCN) guard restricts the interface from propagating topology change information:  Enable: The interface can propagate topology change information.  Disable: The interface cannot propagate topology change information. Disable