Delta Electronics DVS — 3.8.1.2 Rate Limiting

Chapter 3 Featured Functions Note: For each interface and each of the three types of traffic, you can set the recovery mode, recovery level type, and recovery level. The drop-down lists and fields function the same for each of the three types of traffic. 3.8.1.2 Rate Limiting You can configure the traffic rate for each interface in both directions in this page. Rate Limiting 3-73 Description Factory Default Recovery Level Specify the threshold at which storm control is activated. If the value is 5, it indicates 5 percent of the link speed. By default, when traffic exceeds 5 percent of the link speed, the switch discards the traffic. 5 Description Factory Default Port The interface number.

interface number Egress RateLimit (kbps) Enter the egress port rate limit as a value in the range of 1 to 1,000,000 kbits per second (kbits/s). The value that you enter is actually applied in increments of 64 kbits/s. If the value is 0, it effectively disables the rate limit. 0 Ingress RateLimit (kbps) Enter the ingress port rate limit as a value in the range of 1 to 1,000,000 kbits per second (kbits/s). The value that you enter is actually applied in increments of 64 kbits/s. If the value is 0, it effectively disables the rate limit. 0