Technical Manual for EA350 Analog Pulse Type Servo Driver V101 SIZE E: Overall dimensions of EA350-038-3B EA350-052-3B EA350-062-3B Note: Accessories should be purchased separately for through-wall installation. The customer can also fabricate such accessories by themselves. 12.5 Servo motor specification *1: It is not recommended to choose any non-standard variety. *2: For a 130 flange motor, Y is a 8mm-wide open key, Z is a 6mm-wide double round or open key. Elements of the 10 servo motor models are not subject to causal combination. For details, refer to the selection guide or consult us. 257 1st place Series 2nd place Motor flange size 3rd place Rated output power of motor SER:
Standard servo motor SES: High-performance servo motor SEC: Large-power servo motor 04: 40mm 06: 60mm 08: 80mm 09: 86mm 11: 110mm 13: 130mm 18: 180mm 20: 200mm 23: 230mm 005: 50W 0R1: 100W 0R2: 200W 4R4: 4400W 5R5: 5500W 7R5: 7500W 011: 11kW 029: 29kW 4th place Rated speed 10: 1000rpm 15: 1500rpm 20: 2000rpm 25: 2500rpm 30: 3000rpm 7th place Inertia type 9th place Optional A: Low inertia B: Medium inertia C: High inertia Null: No optional accessory 1: With holding brake (DC24V) 2: With oil seal 3: With holding brake and oil seal 4: With fans 5: With holding brake and fans 5th place Voltage class 2: 220V 3: 380V 8th place Shaft end 6th place Encoder type X:
Optical axis, without key slot *1 Y: With U-shaped key slot and screw hole *2 Z: With double-circular key slot and screw hole B: 17-bit incremental encoder F: 23-bit absolute type encoder Special specifications 10th place