Nio — Front Climate Control

Climate Control When the outside of the front windshield becomes fogged, it is recommended to turn on the wipers and AUTO Mode of climate control. When the inside of the front windshield becomes fogged, it is recommended to turn on the front windshield defogging feature. After the fog is removed, turn on the AUTO Mode of climate control and enable Auto Defogging. You can enter Settings from the bottom of the center display, tap Cabin Comfort > Auto Defogging, and set the sensitivity. The front windshield defogging feature will be automatically turned on when the front windshield fogs up inside. 6. Rear windshield heating Tap to warm up the rear windshield.

This feature automatically turns off after 15 minutes. 7. Air Vent Mode Off: The driver-side air vents are closed. You cannot turn off the four air vents in the front at the same time. Free: The angle of the two driver-side air vents can be adjusted individually. Balanced: The angle of the two driver-side air vents are symmetrical. Sweep: The air vents sweep up and down, left and right. 8. Front fan speed Tap the "+" or "-" icon to adjust the front fan speed. The front vents operate at eight speed levels. 9. AUTO Tap to turn on AUTO Mode.

This automatically adjusts the temperature, fan speed, air distribution, and air circulation of the front and rear seats according to the temperature you set. Tap a second time to turn off AUTO Mode. The air conditioning status will remain unchanged. 10. Air distribution Users can choose from seven air distribution modes: Air on Windshield, Air on Face, Air on Feet, Air on Face and Feet, Air on Feet and Windshield, Air on Face and Windshield, and Air on Windshield, Face and Feet. 124 Icon Air distribution Air on windshield If used together with a high fan speed, it will quickly defog and defrost the front windshield in cold and humid weather conditions.