Driving Experience Feature Settings Autohold The function of Autohold is to keep the vehicle stationary for temporary parking when the brake pedal is released. Go to the Settings page from the control bar at the bottom of the central display, tap Driving > How to activate Autohold and select the corresponding method to activate Autohold. • Flooring: Step on the brake pedal until the vehicle stops, then slightly release and step on the pedal again to activate Autohold • Auto activation: Step on the brake pedal until the vehicle stops, and then Autohold will be automatically activated. When Autohold is activated, the icon will be displayed on the digital instrument panel.
When active, you can step on the accelerator pedal or the brake pedal to deactivate Autohold. Caution The Autohold mode will not be enabled when the vehicle is in REVERSE (R gear). You still need to use Full Press Activation to park. You can also floor the brake pedal to activate Autohold in an emergency. You can also activate Autohold when parking on an uphill road, where the braking system will provide sufficient braking force to keep the vehicle stationary in accordance with the degree of the slope. Caution The grade of the slope shall not exceed 20%.
Emergency Braking In the event of a brake pedal failure, you can activate Emergency Braking by pressing the Park gear button, which will produce full braking deceleration under normal circumstances to stop the vehicle. • Press and hold the Park gear button to activate Emergency Braking. 166