Nio — Auto Lane Change (ALC)

Driver Assist Features Auto Lane Change (ALC) The Auto Lane Change (ALC) adds a lane change assistance function on the basis of realizing Lane Centering Control (LCC). After enabling this function in Settings, the system will assist the vehicle to complete the lane change by toggling the turning signal lever when the environment and road conditions meet certain requirements. The Auto Lane Change (ALC) is applicable to high speed roads. The current and target lanes must be well lit, have clear lane markings and space to change lanes. Warning As a driving assist feature, Active Lane Change cannot handle all situations in all traffic, weather, and road conditions.

You must always pay attention to traffic and road conditions and make your own decision on whether to use Active Lane Change if it is safe. You should always be ready to take over when you find that the conditions of the traffic, road, or the vehicle are not suitable for Active Lane Change, or there are other unsafe factors. You always bear the ultimate responsibility for changing lanes safely and complying with current traffic laws and regulations. Enable/disable the Auto Lane Change (ALC) Go to the Settings page from the control bar at the bottom of the central display, and tap NIO Pilot >Auto Lane Change (ALC) to enable or disable this function.

Operating conditions for the Auto Lane Change (ALC): • The driver's hands on the steering wheel • The Lane Centering Control (LCC) is enabled and operating normally. 255