Driver Assist Features The following situations may lead to a radar recognition disorder, thus making it impossible to complete the lane change assistance, which include but are not limited to: • Misplaced or blocked radar, or covered with mud, ice and snow, metal plates, tapes, labels, leaves, etc. • The radar or the area surrounding it is impacted due to a vehicle collision, scratch, etc. • Extreme weather such as rain, snow, fog, haze, which may affect radar performance • Due to the limitation of radar target recognition characteristics, in rare special circumstances, false alarms may occur for some metal barriers, green belts, cement walls, etc.
The following situations may lead to a laser radar recognition disorder, affect the function of lane change assistance, and even cause the function to deactivate, which include but are not limited to:
• Changed installation position of laser radar • Severe weather such as rain, snow, fog, haze • Exhaust gas, water spray, snow or dust lifted up by the vehicle ahead • Driving on wet or waterlogged roads • Obstructions such as water, dust, micro-scratches, oil sludge, dirt, wiper, ice, snow, tinted or transparent film on the laser radar window • Overheating of the laser radar caused by prolonged sun exposure • Due to the limitation of laser radar characteristics, in rare special cases, false alarms may occur for the traffic signs/high-speed anti-collision barrels in high-speed/elevated sections The Auto Lane Change (ALC) may leak or misdetect obstacles in the target and current lanes.
You must always confirm whether it is safe and appropriate to change lanes before and during the lane change. The targets below may not be identified, and may trigger a response, which include but are not limited to: • Side-crossing vehicles • Motorcycles, tricycles The targets below will not trigger a response, which include but are not limited to: 260