Nio — Adaptive Cruise Control (ACC)

Driver Assist Features When driving by using Adaptive Cruise Control, you can depress the accelerator pedal hard at any time to take over your vehicle in a short amount of time. At this time, Adaptive Cruise Control will no longer respond to the target vehicle ahead, and your vehicle will be completely under your control. When you release the accelerator pedal, your vehicle will return to the cruising speed. When Adaptive Cruise Control actively accelerates your vehicle, the accelerator pedal will not move. When Adaptive Cruise Control decelerates your vehicle, the brake pedal may move.

After you exit Adaptive Cruise Control by pressing the central button on the left side of the steering wheel or depressing the brake pedal, you can activate it again by pressing the upper button on the left side of the steering wheel, and you can restore the vehicle's speed to the previously set cruise speed. If you press the upper button on the left side of the steering wheel while depressing the accelerator pedal, the current speed will be set as the cruise speed. The maximum set speed is 180 km/h (110 mph). Operating Conditions of Adaptive Cruise Control:

• The high-definition camera, laser radar and millimeter wave radar function normally, and the field of vision is clear • No components of Adaptive Cruise Control are faulty • Your vehicle meets all safety conditions, such as: є Driver seating status є The driver's hands on the steering wheel є The driver has fastened his seat belt є All doors are closed є Your vehicle is in gear position D є The driver does not step on the brake pedal є Anti-lock brake system, traction control system and vehicle stability control system are not triggered • The function cannot be activated when the steering angle of the steering wheel is too large • The speed does not exceed 180 km/h or 110 mph 283