Doors & Windows When the vehicle is in PARK and the driver seat is unoccupied, you can use the smart key fob to control the windows. With the doors, hood, and tailgate closed, press and hold the Unlock button on the smart key fob to fully open all windows; then press and hold the Lock button to fully close all windows; while the window is in motion, release the Unlock or Lock button to stop the windows at their current position. All four windows feature anti-pinch protection. When an obstruction prevents the window from closing, the window will stop closing and move down slightly. The window's anti-pinch detection area is as follows:
Under the following conditions, anti-pinch protection for the corresponding window will be temporarily disabled and Quick Window Closing will not be available (but will automatically be restored after 10 seconds): 1. The window is frozen, which stops the window from moving up. 2. Anti-pinch protection is activated three times within 15 seconds, which stops the window from moving up. If a power window does not function and anti-pinch protection fails (e.g. due to restarting the low voltage battery after a power failure), you can initialize it as follows: 1. Toggle the corresponding switch backward until the window is fully closed. 2. Release the switch and the window will move down slightly.
Toggle the switch backward again until the window is fully closed. 3. Press the switch to lower the window until it is fully open. 33