Tire Information 7. Remove the lug nuts and change the flat tire. When mounting the new tire, ensure the lug nuts are aligned with the mounting holes and the metal surface of the rim is in proper contact with the mounting surface. 8. After installing the lug nuts, use the jack to lower the vehicle to the ground and exit the Jack Mode on the center display. Tighten all the lug nuts clockwise with the lug wrench. Then, use a torque wrench to tighten the lug nuts to the specified torque. 9. Check the tire pressure after replacement. If necessary, inflate the tires to the rated range, and then replace the tire valve cap. 10. Properly stow all the tools, the jack, and the flat tire. 393