Nio — Towing the Vehicle after an Accident

Breakdown Services 3. Keep the vehicle in PARK, press the brake pedal, Enter Settings from the bottom of the center display, and tap Driving > Tow/Wash Mode. The vehicle will release the parking brake and become towable. (Please use the wheel stopper accordingly to prevent sliding.) 4. Before towing, power off the vehicle and turn on the hazard warning lights to ensure that the whole vehicle is locked and no occupant is in the vehicle. 5. Attach the tow chain to the tow bar and slowly tow the vehicle to the flatbed truck. 6. After pulling the vehicle onto the flatbed truck, use the wheel stopper and straps to secure the tires onto the truck. 7.

Before transporting the vehicle, exit Tow/Wash Mode on the center display and tap Driving > Jack Mode to maintain the suspension at the current ride height and avoid height changes during transportation. Caution • The vehicle can only be towed from the site when there are no safety risks in doing so. If the high voltage battery is deformed, leaking or emitting smoke, address the risk posed by the high voltage battery first. • Try restarting the 12V battery if Tow/Wash Mode cannot be turned on normally. If the park brake cannot be released, use a tow dolly or a trailer to transport the vehicle a short distance.

• Do not slam on the brake pedal or accelerator pedal when exiting Tow/Wash Mode on the center display. 412