GTC – SOFTWARE DEVELOPMENT GROUP Connect the adapter module to the board using the interface cable as shown in the following picture. Fig. 21. Board with appliance cable connected Connect the adapter module to the PC using the USB cable and turn on the adapter module. This operation turns on the spare board as well. VERY IMPORTANT NOTES! You may hear an intermittent beep when the spare board is powered on by the adapter. This beep is due to the fact that the board detects a false alarm condition since it is not yet installed in the appliance.
When you turn on an appliance for the first time after you have reconfigured it, or after you have replaced the electronic board, the machine may automatically start the electric test (the electric test is only used in the factory at the end of the assembly line). Turn the appliance on and off to set it back in normal mode. © 2012 Electrolux Italia S.p.A., All rights reserved 30 File: SidekickPC Manual (EN).pdf - Date: 20/04/2012