GTC – SOFTWARE DEVELOPMENT GROUP When the Secondary Power Switch is in the ON position , the USB cable is connected to the PC, but the target cable is NOT connected to the board or appliance, the Secondary Power LED on the side of the target cable is ON. When the Secondary Power Switch is in the OFF position , the Secondary Power LED turns ON only when the target cable is connected and the board or appliance under test is turned on with the mains power supply. As a general rule: 1. you should turn the switch ON when programming standalone boards not connected to the mains power supply; 2.
you should turn the switch OFF when programming standalone boards connected to the mains power supply or when connecting to appliances. © 2012 Electrolux Italia S.p.A., All rights reserved 34 File: SidekickPC Manual (EN).pdf - Date: 20/04/2012