electrolux WM-WD — Electrolux WM-WD — руководство по ремонту (EN)

In case of burning on the main circuit board, check that the problem is not caused by another electrical component (short-circuits, poor insulation, water leakage). Refer to the figures below in order to identify the component that might have caused the burning according to the position of the burned area. The circuit board shown below is the version with the greatest number of components: other boards may not feature all these components. QUICK GUIDE AND APPLIANCES LIST 599 72 40-80 ENV06 EWM11xx EWM21xx EWM25xx/35xx 3.14 Burning on the circuit board EWM2100 WM/WD 1. Power supply 2. Motor 3. Heating element 4. Drain pump 5. Door safety interlock 1. Power supply 2. Motor 3.

Heating element 4. Drain pump 5. Door safety interlock 6. Tachometric generator (motor) 7. Water fill solenoids 8. NTC temperature sensor washing 9. Analogic sensor 10. Drum positioning (top-loader) 11. Flowmeter 12. Circulation pump 13. Communication WD board 14. Communication LCD