6.2.1 Displaying the alarm The alarm is displayed by a repeated flashing sequence of the START / PAUSE button with yellow and red light (0,5 seconds on, 0,5 seconds off with a 2,5 second pause between the sequences). button indicator START / PAUSE with yellow light indicates the first digit of the alarm code (family) button indicator START / PAUSE with red light indicates the second digit of the alarm code (internal number of the family) These two LEDs are featured in all models. Notes: The first letter of the alarm code “ E ” (Error) is not displayed, since this letter is common to all alarm codes. The alarm code “families” are shown in hexadecimal; in other words:
A is represented by 10 flashes B is represented by 11 flashes ... F is represented by 15 flashes 6.2.2 Examples of alarm display Example: Alarm E43 (problems with the door interlock Triac) will display the following: the sequence of four flashes of the START / PAUSE button with yellow light, indicates the first number E 4 3; the sequence of three flashes of the START / PAUSE button with red light, indicates the second number E4 3 ; 6.2.3 Operation of alarms during diagnostics All alarms are enabled during the components diagnostics phase.
SOI/DT 2007-11 dmm 28/69 599 70 39-88 START / PAUSE button with yellow light START / PAUSE button with red light ON / OFF Time (Sec.) Value ON / OFF Time (Sec.) Value 0.5 1 0.5 1 0.5 0.5 0.5 2 0.5 2 0.5 0.5 0.5 3 0.5 3 0.5 0.5 0.5 4 2.5 Pause 0.5 1.5 Pause