12 ACCESSIBILITY TO THE ELECTRONIC CONTROL SYSTEM 12.1 WM Version 12.1.1 Work top a. Remove the two rear screws, push the top panel towards the rear and release from the cabinet. 12.1.2 Control panel b. Extract the drawer. c. Remove the screw which secures the control panel to the dispenser. d. Release the clamp from the cross-member. e. Cut the clamp which secures the wiring to the board casing (while re-assembling, put a new clamp). f. Loosen the screws which secure the cross-member to the cabinet and that central to the conveyor. g. Release the hook of the dispenser to the cross-member. h. Loosen the screws and release the hook which secures the control panel to the cross-member.
SOI/DT 2007-11 dmm 65/69 599 70 39-88